Immunet 3.0
Started by
paul
, Feb 09 2011 06:16 AM
8 replies to this topic
#1
Posted 09 February 2011 - 06:16 AM
just upgraded Immunet protect plus to version 3.0 and installation was a success aswell as updates no problems or issues so far. thanks Paul
Paul
#2
Posted 09 February 2011 - 12:53 PM
Well, for any issues contac us.
Orlando
Orlando
Orlando Pivi [Online Country Manager - Italy]
Emsisoft Team - www.emsisoft.com
Emsisoft Team - www.emsisoft.com
#3
Posted 10 February 2011 - 09:45 AM
Orlando, on 09 February 2011 - 12:53 PM, said:
Well, for any issues contac us.
Orlando
Orlando
Paul
#4
Posted 10 February 2011 - 04:12 PM
paul, on 10 February 2011 - 09:45 AM, said:
hi Orlando just a quick query, if i enable the Clam Av detection engine in Immunet Plus 3.0 will this conflict with my security setup which is comodo internet security complete 2011,and malwarebytes, sandboxie. thanks Paul.
If you set ClamAV engine on we recommend to have Immunet Protect 3.0 alone without another antivurs, so there is no conflict if you install another vendor with Immunet Protect, but we not recommend because system can slow.
Orlando
Orlando Pivi [Online Country Manager - Italy]
Emsisoft Team - www.emsisoft.com
Emsisoft Team - www.emsisoft.com
#5
Posted 10 February 2011 - 04:56 PM
Orlando, on 10 February 2011 - 04:12 PM, said:
If you set ClamAV engine on we recommend to have Immunet Protect 3.0 alone without another antivurs, so there is no conflict if you install another vendor with Immunet Protect, but we not recommend because system can slow.
Orlando
Orlando
Paul
#6
Posted 11 February 2011 - 09:26 AM
Hi guys,
Here is a new review of Immunet 3.0
Here is a new review of Immunet 3.0
#8
Posted 14 February 2011 - 07:23 PM
Does turning on Clam AV slow an old computer? Does clam work in realtime? Does it slow bootup?
I noticed a ugprade installer conflict with BufferZone PRo. When I upgraded, several services were installed in bufferzone. This caused several identical services to run at boot, causing machine to not boot properly.
I noticed a ugprade installer conflict with BufferZone PRo. When I upgraded, several services were installed in bufferzone. This caused several identical services to run at boot, causing machine to not boot properly.
#9
Posted 14 February 2011 - 07:37 PM
Both TETRA and ClamAV engine can slow an old pc, so we recomend to run Immunet Protect PLUS (without ClamAV) or Immunet Protect Free (with ClamAV for offline protection).
Orlando
Orlando
Orlando Pivi [Online Country Manager - Italy]
Emsisoft Team - www.emsisoft.com
Emsisoft Team - www.emsisoft.com
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users












